A wheelchair ramp needs a continuous route between the approach and the doorway, including its turns, landings and threshold transition. CA-GoodHome’s safety and accessibility services consider those connections together when planning the ramp installation.
What Wheelchair Ramp Installation Covers
Ramp installation should start with the total rise, available route, landing areas, doorway or threshold condition and the exact ramp system being considered. Clear dimensions are essential before a product or layout is chosen.
The project should be based on the real site dimensions and product requirements. The practical accessibility goal can be described without sharing private medical information.
Before the Work
Photograph the proposed route from its starting surface to the doorway, showing every turn, landing and level change. Provide the total rise, available run length and clear width, together with the wheelchair’s space needs and the proposed ramp-system details if selected.
Show the ground or structure beneath each planned ramp section and landing, plus door swings, porch edges, obstacles and the threshold at the destination. Mark any damaged or unstable support and any narrow point where the wheelchair would need to turn or approach the door.
After the route, landings and ramp system are confirmed and the supporting areas are ready, the sections are positioned and joined using the selected system’s specified supports and attachments. Included landings, edge protection and handrails are fitted in sequence with the doorway and threshold transitions, following the manufacturer’s instructions.
Final review follows the complete route from the approach to the doorway, checking section connections, support positions and the agreed transitions. Landings, turns, door movement and the clear space needed for the intended wheelchair are checked against the layout and product requirements. Unresolved attachment or clearance concerns must be addressed before use.
What Can Change the Scope
Total rise, required run length, turns, landings, slope, support surface, anchoring, weather exposure and connections to doors or porches can change the project.
Where the required access route cannot fit safely within the available space, the project may need broader entry or structural changes rather than forcing a standard product into the site.
What to Send With Your Request
- Route photos from approach to destination, including turns.
- Total rise, available run, clear width and landing space.
- Selected ramp-system information and intended wheelchair space needs.
- Support condition, doorway movement and threshold details.
Describe the practical movement or access problem the project should solve; that is enough for initial planning.
Common Questions
Will a prefabricated product fit every entry?
A modular or prefabricated ramp can suit some sites, while limited space, unusual height or structural integration may require a more customized access solution.
Should handrails, thresholds or doorway work be planned at the same time?
Yes. Handrail installation must be coordinated with the ramp’s usable width, landings and turns. Assess doorway widening where the opening limits passage, and interior threshold lowering where a raised interior transition interrupts the onward route. These changes should support the same continuous access plan.